Products Services  

 Home Heat Recovery Ventilation

and Flatpack Duct Installation

Healthy Energy efficient ventilation for your home

Call 0830023939/0863377448 Now

Air Minder

by continually refreshing indoor air whilst minimising the loss of winter warmth, the Award winning Air Minder is the ultimate whole house heat recovery ventilation system. It removes stale moist air and introduces fresh filtered air into the home whilst also recovering up to 90% of the heat which would otherwise be wasted by more conventional ventilation systems.

Key Benefits

• up to 90% heat recovery whilst controlling condensation
• Low watt energy efficient DC motors
• meets future european directives for efficiency 

HR 350

wholehouse heat recovery system with up to 95% energy efficiency whilst controlling condensation. The HRE350 is specifically designed for new build homes with a high level of insulation, where it collects stale, humid air and then ducts it away to the outdoors, whilst using over 95% of the extracted indoor warmth to heat the incoming replacement air stream.

The HRE350 offers extensive controllability which allows setting of speeds to any required performance. It also offers "Close Control" to prevent over-ventilating. This unit is small and easily manageable which makes it the perfect solution for any apartment.

HR250

Cupboard mounted intake/extract wholehouse ventilation unit with built-in heat recovery facility. It has twin centrifugal motor/impellers which provide balanced supply and extract ventilation with up to 70% heat recovery. In conjunction with the 150VA Transformer the unit has the facility for matching the performance of the unit to the size of dwelling.

HR25

The through the wall HR25 range provides a low voltage solution for wet rooms and comes with 3 control options: pullcord, PIR and humidity versions, and available in two lengths. The units offer the latest technology featuring 84% heat recovery and easy, core drill installation. The 2-speed units are fitted with a 24V LoWatt Energy Saving DC motor with state of the art switch mode power supply. These units have the ability to operate at a power consumption of under 2 Watts running at trickle speed. A 5m cable is provided for fixed wiring the unit to the S.M.P.S. Requiring only 152mm core drill, the units are suitable for walls from 310mm up to 425mm thick.

HR205 cooker hood unit

The HR205 unit is a residential mechanical ventilation designed solely to operate with the incorporated telescopic cooker hood. The unit transfers incoming fresh air, tempering it before it enters the habitable rooms. Its compact design allows installation within a standard kitchen cooker hob cupboard space.

Send mail to sales@homeheatrecovery.ie with questions or comments about this web site.